Making High Impedance Headphones

With less than 5 bucks (better known as $5 USD) you can make a high-impedance headphones for your homemade crystal radio. (11/27/2007)

 

Nick asked me if my homemade high-fidelity speaker can work as high-impedance speaker for his crystal radio. Unfortunately, the answer is No. It doesn't work. To increase the resistance of the speaker we need 38 or 40 AWG wire and hundreds of loops. That is too much trouble for something simple.

 

piezoelectric We can make our hi-impedance earphones with less than 5 bucks using piezoelectric speakers. Here is what we need:

 

  • A broken LCD Watch with Alarm. (It needs to be WITH alarm). It costs about $2 USD.
  • Glue.
  • "Made in china" small screwdrivers. ($1 USD)
  • Cheap headphones. (Not the SONY one that I did use. that one was expensive.) You can buy some for one or two bucks.
  •  

     

    If you don't have those items, is a good idea to use "made in china" products as it is just junk. I will show you why later.

     

    LCD watch with alarm First, we take the broken watch and open it.

     

    What? this one is not a broken one?

     

     

    Ok, now it is broken. We can use it for our project. (Kids: Don't try this at home)

     

    open the watch Open the watch. You may need a really small screwdriver. You can buy one at the Dollar stores just for one dollar. ($1 USD)

     

    Pay attention to the message at the back of the clock. It says "MADE IN CHINA", "STAINLESS STEEL" and "WATER RESISTANT". Do you believe that? I never believe anything from Chinese products unless a good brand guarantee it.

     

    Here is the Piezo After the watch is open, we can see the piezoelectric. It acts like a speaker on our watch.

     

    If you pay attention to the watch, you will notice there is no seal at all. Anyone can explain me how a "Water resistant" watch doesn't have any seal? Of course! It's made in china!

     

    Whatever, let's go to the point.

     

    opening the headphones Now we can take apart the headphones.

     

    remove the speakers Let's remove the speakers located inside...

     

    remove the wires Remove the wires... careful when using the iron.

     

    By the way: Always know how to use your tools. Wear eye protection all the times when doing or making projects. I know a moron that wanted to save $60 dollars replacing the refrigerator handle by himself. He didn't know how to do it, the handle wasn't properly fixed and it fell on his eye. He lost an eye and sued the company that makes the refrigerator.

     

    Be safe guys.

     

    soldering the wires Solder the wires in the piezoelectric. Be careful not to damage the white area.

     

    Glue the piezoelectric Glue the piezoelectric in the headset...

     

    close it ... and close it. Now you have your own high-impedance headphones for your crystal radio project.

     

    Even if you don't want to make your headphones or you don't want to make your crystal radio, you can have fun with the piezoelectric! It basically is a tweeter and have some interesting applications.

     

    I will post the interesting properties soon.One application of the piezoelectric is to generate electricity. Read more about this at How to get electricity from piezoelectric materials

     


     < Make Mexican Paper Decorations.Homepage
    diy Index
    Making Homemade Transistors> 

     

    If any information, data, picture or design infringes a copyrighted material, please send me an e-mail asking to remove it along with the supporting data.
    Some features may not work with Google Chrome. © 2006-2010 Jose Pino - Powered by JPC Alpha